View HO1078_1250919.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HO1078
* * * SAW Frequency Stabilization Fundamental-Mode Oscillation at 1030.0 MHz Ideal for Air Traffic Control Transponder Applications
The frequency of this oscillator is stabilized by surface-acoustic-wave (SAW) technology. This results in excellent performance from a compact, rugged, oscillator operating at the fundamental frequency of 1030.0 MHz. The highly-reliable HO1078 is designed for use in air traffic control (ATC) radar transponders in commercial aviation. It is a commercial version of the HO1080 oscillator.
1030.0 MHz SAW Oscillator
Absolute Maximum Ratings
Rating DC Supply Voltage Ambient Temperature Powered Storage Value 0 to +13 -40 to +85 -40 to -100 Units VDC C
Dip 16-8 Case
Electrical Characteristics
Characteristic Operating Frequency RF Output Power Discrete Spurious Second Harmonics Third and Higher Harmonics SSB Phase Noise RF Impedance DC Power Supply Nonharmonic 1 kHz Offset 10 kHz Offset Nominal Impedance Operating Load VSWR Operating Voltage Operating Current Lid Symbolization (YY=Year, WW=Week) ZO GL VCC ICC 2, 3, 4 Absolute Frequency Tolerance from 1030.0 MHz Sym fO fO PO Notes 1, 7 3, 6 Minimum 1029.750 +8 Typical 1030.0 Maximum 1030.250 250 +10 -25 -35 <-100 -100 -120 50 11.75 1.5:1 12.25 40 +14 -20 -30 -80 -90 -110 Units MHz kHz dBm dBc
2, 3, 4 3 3, 5 3, 6
dBc/Hz VDC mA
12.0 35
RFM HO1078 YYWW
BLOCK DIAGRAM CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. COCOM CAUTION: Approval by the U.S. Department of Commerce is required prior to export of this device. Notes:
1. 2. 3. 4. One or more of the following United States patents apply: 4,616,197; 4,610,681; and 4,761,616. Unless noted otherwise, all specifications are listed at TA = +25C 2C, VCC = nominal voltage 0.01 VDC, and load impedance = 50 with VSWR 1.5:1. The design, manufacturing process, and specifications of this device are subject to change without notice. Applies to oscillator only and not to sidebands caused by external electrical or mechanical sources. (Dedicated external voltage regulation with low-frequency filtering for the DC power supply and proper circuit board layout are recommended for optimum spectral purity.) For specified maximum operating load VSWR (any angle) at FO. (No instability or damage will occur for any passive load impedance.) For any combination of VCC and TA within the specified operating ranges. Applies for any combination of Note 5 and 6 conditions.
V CC
RF OUTPUT SAW Oscillator Buffer Amplifier
ELECTRICAL CONNECTIONS
VCC 15 Ground
Ground 1 Ground 2
Top View
5. 6. 7.
Ground 7 Output 8
10 Ground 9 Ground
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com http://www.rfm.com HO1078-111201
Page 1 of 2
1030.0 MHz
DIP16-8
SAW Oscillator
Metal Dual-Inline Package with 8 leads in a 16-lead DIP configuration
mm Dimension MIN A B C D E F G H K L M N R -- -- -- 0.40 MAX 25.02 12.83 6.35 0.51 MIN -- -- -- 0.016
Inches MAX 0.985 0.505 0.250 0.020
0.64 Nominal 7.62 Nominal 2.54 Nominal 17.78 Nominal 3,39 1.30 -- -- 1.75 6.73 -- 11.18 22.60 2.26
0.025 Nominal 0.300 Nominal 0.100 Nominal 0.700 Nominal 0.130 0.051 -- -- 0.069 0.265 -- 0.440 0.890 0.089
Top View
B M C K
Bottom View
(4 Places)
F R
(3 Places) 8 7 9 10
L
A
N
2 1 15 16
H G
(4 Places)
D
Pin 1 Mark (Optional)
E
(8 Places)
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com http://www.rfm.com HO1078-111201
Page 2 of 2

▲Up To Search▲

Price & Availability of HO1078

	To Download HO1078 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .